CHEMICAL COATINGS
TriCom Coatings has developed a fullline ofdiversified and specific
industrialcoatings. The latestin exotic materials are currently available. Ifthere
are any specific needs, we willcustom formulate tomeet your most exacting
requirements. Please contact TriCom Coatings personnel for fullinformation.

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
A-423-66 Fed. Std.595B One typeoftwo-component epoxy based finishcoatfortheaerospace industry.
This productisspecificallyformulatedforindustrialaerospaceuseonmetals.
A-932-66 #17178 Aluminum A two-component aluminized epoxyenamel.
A-A-8 N/A Shellac.
A-A-208B Fed. Std.595B A marking ink.
A-A-344 Cleargloss An interiorandexteriorlacquer.
A-A-665D Fed. Std.595B An aerosolnitrocelluloselacquer.
A-A-665E Fed. Std.595B An aerosolfast-dryalkydenamel.
A-A-857B N/A A thinnerforreducingtheviscosityofcellulose-nitratebaseddopesand lacquers
of thesprayingtype.Suitableforuse under airpollutionregulations.
A-A-1452B #17038 Black An acid,gasolineand oilresistantlacquerformulatedforsprayingthealuminum
#17875 White surfacearound storagebatteries.
-Type I:#17038 Gloss Black
-Type II:#17875 GlossWhite
A-A-1546A Fed. Std.595B A rubbingvarnish.
A-A-1558A Fed. Std.595B A high opacity,solventbasecoatingforusein markingbales,crates,boxes and
drums.
A-A-1572 Clear A lacquertype sandingsealerforspray application.Foruseoninteriorwoodto be
topcoated withclearlacquerfinishes.Maybe appliedbyconventionalor airless
spray equipment.Can be used inconjunctionwitha stain,washcoatand/ora filler
togetherwithlacquerfinishcoats.
A-A-1788 Fed. Std.595B An oilbaseinteriorvarnish.
A-A-1800 Fed. Std.595B An oilbasespar varnish.
A-A-2246B Fed. Std.595B A ready mixed,flatgloss,latex-basedpaintforuseoninteriorwallsandceilings.
A-A-2335 Clear A varnish-typesurfacesealerforwood and corkfloors.
A-A-2336 White An oilbase/alkydwood primerforinteriorandexteriorsurfaces.
A-A-2787 Fed. Std.595B A solventthinned,lowVOC, aerosolenamel.
A-A-2850 Fed. Std.595B A waterborne polymericcoatingcompound.
A-A-2886A Black A ready-mixed trafficpaintforapplicationtotrafficbearingsurfaces,suchas
Green Portlandcement, concrete,bituminouspavement, bricksurfacesofstreets,
Yellow highways, bridges,tunnels,etc.
Red -Type I:Standarddry
blue -Type II:Fastdry
A-A-2904 N/A A mineralspirit,regularandodorless,foruseasa solvent,cleanerorthinnerwith
coatingssuch as alkydpaints,alkydprimers,composed ofnaturalorsyntheticresin
vehicles.
-Type I:Conventional
-Type II:Highflashpoint
-Type III:Odorless
A-A-2962A Fed. Std.595B An exteriorgrade,semi-glossalkydenamel formulatedforlow "VOC" content.
-Type I:Lusterless
-Type II:Semigloss
-Type III:Gloss
-Class A:340 g/lmax VOC
-Class B:420 g/lmax VOC
A-A-2994 Fed. Std.595B A primercoatingforinteriorwalls/wood.
A-A-3003 Fed. Std.595B A very highqualitynitrocelluloselacquerforgeneralinterioruseasafinishingcoat
over aproperlyprepared primedmetal,plasticorsealedwood substrates.
A-A-3054 Black A heat-resistingpaint.
A-A-3058 Fed. Std.595B An interiorfire-retardantpaint.
A-A-3120 Fed. Std.595B A swimming poolpaint.
-Class A:Acrylicbase
-Class C:Chlorinatedrubberbase
-Class E:Epoxy base
2

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
A-A-3121 Fed. Std. 595B A high quality, chlorinated rubber deck enamel for concrete and masonry surfaces.
This product is extremely durable and provides a chemical resistant surface. This is
a single-component coating, no catalyst required.
A-A-3161 Fed. Std. 595B A coating primer conditioner for chalking exterior surfaces.
A-A-3164 Fed. Std. 595B A low VOC, lusterless and semigloss synthetic resin lacquer for application onto a
lacquer resistant primer or recoating properly prepared metal surfaces.
A-A-3165 Fed. Std. 595B A durable, pigmented, high gloss lead and chromate free lacquer for spray or brush
application. Ithas good exterior durability and gloss.
A-A-3183 Fed. Std. 595B A latex exterior paint.
A-A-50574 Fed. Std. 595B A high quality odorless semigloss alkyd enamel for use on all interiorwood, metal
or masonry surfaces. This product isextremely durable with excellent flow and
leveling characteristics.
A-A-59166 Fed. Std. 595B A non-slip walkway coating forthe exterior of aircraftsurfaces.
-Type I:Smooth, no grit
-Type II:Grit added
A-A-59281 N/A A cleaning compound of solvent mixtures.
-Type I:Normal blend
-Type II:Non-photochemically reactive blend
AMS-3170 N/A One type of specially blended solvent specially formulated for the reduction of
Graphite Varnish Coating.
ASTM-D-740 N/A Shellac.
C-252-66 N/A A gloss epoxy type catalyst isan amine based air dry catalyst designed specifically
for two component epoxy coatings.
C-1178-66 N/A C-1178-66 type converter is an amine based catalyst designed specifically for two
component epoxy coatings. Such films show excellent chemical, solvent and
corrosion resistance as well as hardness and toughness.
DOD-E-1115C White An interior/exterior alkyd enamel.
DOD-E-24607A Fed. Std. 595B A government specification, non-flaming enamel.
(Semigloss only)
DOD-P-15328D Green A two-component metal pretreatment wash primer.
MIL-A-6091 N/A A specification denatured alcohol solvent.
MIL-C-450C Black A bituminous, asphalt solvent type coating for application on the interior surfaces of
ammunition items such as bombs, shells, rockets, and mines prior to being filled
with explosives.
-Type I: 15 - 28 seconds #4 Ford Cup viscosity
-Type II: 120 - 190 seconds #4 Ford Cup viscosity
-Type III: 150 - 250 seconds #4 Ford Cup viscosity
MIL-C-8514C Yellow A metal pretreatment wash primer.
MIL-C-17504B Clear A single component, clear acrylic plastic coating for use as a protective coating.
Formulated for the protection and sealing of substrates. Provides resistance to
water, sunlight, chemicals and abrasion. Available inbulk liquid form and in aerosol
cans.
MIL-C-22750D Fed. Std. 595B A two-component epoxy-polyamide coating forspray and brush applications,
furnished ina packaged kitand suitable for use under air pollution regulations.
Formulated for the protection against solvents and chemicals on interior and
exterior surfaces.
-Type I:Standard formulation
-Type II:Low infrared reflection formulation
MIL-C-22750F Fed. Std. 595B A two-component, hi-solids, low-VOC, epoxy-polyamide coating for spray and
brush applications, furnished ina packaged kitand suitable for use under air
pollution regulations. Formulated for the protection against solvents and chemicals
on interiorand exterior surfaces.
MIL-C-38736B N/A A cleaning compound of solvent mixtures.
-Type I:Normal blend
-Type II:Non-photochemically reactive blend
MIL-C-46168D Fed. Std. 595B A two-component, hi-solids aliphatic, CARC polyurethane coating.
3

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
MIL-C-81773C Fed. Std.595B A two-component polyurethane coating.
MIL-C-83231A Black A rainerosion-resistantpolyurethanecoating.
White
MIL-C-83286B Fed. Std.595B A two-component, isocyanate/polyesterpolyurethanecoatingformulatedfor
excellentexteriordurabilityandglossretention.
MIL-C-83445A White A rainerosion-resistant,non-yellowingwhitepolyurethanecoating.
MIL-C-85285C Fed. Std.595B A two-component aliphatic,polyesterpolyurethanecoating.
MIL-DTL-15090D #26307 LightGray A lightgrayequipment enamel foruse asa topcoaton equipment,furnitureand
electricalequipmentsuchas switchboardinstallations.
MIL-DTL-24441C #26270 Haze Gray A two component epoxy polyamide paintdesignedto protectsurfacesfrom
environmentalattack.ThiscoatingisLow VOC as wellas leadand chromate free.
MIL-DTL-24631 #37038 Black An exteriorgradepolyesterurethanepaint.
-Type I:Epoxy
-Type II:Polyurethane
MIL-E-5558A Fed. Std.595B A bake dry,alkydbase, wrinklefinishenamel.
MIL-E-7729B Fed. Std.595B A high grade,singlecomponent, airdry,highglossalkydenamel formulatedfor
interiorandexteriorprimedmetaland wood surfaces.
MIL-E-11195E Fed. Std.595B A fastdrying,lusterless,lowVOC alkydenamel.
(Lusterlessonly)
MIL-E-15090C #16307 Gray A generalpurpose enamel withgood durabilityforuseonsteelfurniture,machinery
#26307 Gray and equipment aboard shipsorat navalinstallations.
-Type I:Medium airdry
-Type II:Fastairdry
-Type III:Baking
-Class 1:Gloss #16307 Gray
-Class 2:Semigloss #26307 Gray
MIL-E-15145E Fed. Std.595B A zincdust pigmented enamel.
MIL-E-16663A Fed. Std.595B A rapid,air-dryingandbakingtypeenamels forproductionlineapplicationby
brushing,spraying,ordipping.Foruse on metalsurfacesof ammunitionand
ammunition containers.
-Type I:Airdry
-Type II:Baking
-Class 1:Rapid drying
-Class 2:Flashdrying
MIL-E-19603C Fed. Std.595B A baking enamel forrollercoatapplication.
MIL-E-22118B Red A syntheticinsulatingenamelforuseon electricalequipmentandforgeneral
purpose use.
MIL-E-24635B Fed. Std.595B An air-dry,siliconeenamelconformingtoMIL-E-24635B. Itishighlyweather
resistantwithexcellentcolorandglossretention.
MIL-E-24763A Fed. Std.595B An emulsion typeenamel.
MIL-E-46096C Fed. Std.595B A lusterless,quick-dry,styrenatedalkyd-typeenamel.
MIL-E-52798A Fed. Std.595B A camouflage alkydenamel.
MIL-E-52891B Fed. Std.595B A zincphosphate type quick-drylusterlessenamelusedas a finishingtopcoaton
primed ammunition components and othermetal substrates.
MIL-I-46058 Fed. Std.595B An electricalinsulatingcompound.
MIL-L-296B Purple A lacquer.
MIL-L-6805 Fed. Std.595B A nitro-celluloselacquer.
(Glossonly)
MIL-L-7178 Fed. Std.595B A nitro-celluloselacquer.
(Glossonly)
MIL-L-10287B Fed. Std.595B A cellulosenitratelacquerusedinboththe manufactureofsmall arms ammunition
foridentificationpurposeandintheassembly ofsmallarms ammunition primers.
-Type I:Opaque
-Type II:Semi-transparent
4

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
MIL-L-11195D Fed Std. 595B A lusterless hot spray lacquer.
MIL-L-19537C Fed. Std. 595B A general purpose exterior protective coating for metal surfaces. It isparticularly
(Gloss only) formulated for resistance to diester lubricating oil,and is primarily intended for
spray application.
MIL-L-19538C Fed. Std. 595B A nitrocellulose camouflage lacquer for metal surfaces, particularly formulated for
resistance to diester lubricating oil, and isprimarily intended for spray application.
MIL-L-46159A Fed. Std. 595B A low reflective acrylic lacquer for aircraft suitable for use under air pollution
regulations. Itis intended to provide a nonspecular surface for aircraft.
-Type I:Spray application
-Type II:Aerosol cans
MIL-L-52043C 12 Fed. Std. 595B A cellulose nitrate semigloss lacquer which can be applied at either elevated or
room temperatures. Itis intended for use as a finish coat on chemically treated
and/or primed tanks, trucks, automotive components and firecontrol systems.
MIL-L-81352A Fed. Std. 595B An exterior acrylic lacquer for protection of metal surfaces.
-Type I:Acrylic
-Type II:Alkyd
-Type III:Polyurethane
MIL-L-81352B Fed. Std. 595B An exterior acrylic lacquer for protection of metal surfaces.
-Type I:Acrylic
-Type II:Alkyd
-Type III:Polyurethane
MIL-P-8585A Green A low-moisture sensitivity, corrosion-inhibiting zinc chromate primer.
Yellow
MIL-P-14105D Fed. Std. 595B A heat-resisting paint intended for use on steel that provides excellent protection.
MIL-P-15328D Blue A metal pretreatment wash primer.
MIL-P-19602B Fed. Std. 595B A size-coating baking primer.
MIL-P-21035B Gray A two part, high zinc dust content, galvanizing repair compound. Provides cathodic
protection similar to galvanizing.
-Type I:Rule 102 compliant
-Type II: 295 g/l max VOC
MIL-P-21563B Clear A high visibility,durable, exterior, fluorescent paint system including a clear overlay
Fluor. Red-Orange coating containing UV and weather stabilizer which issold separate from the
Fluor. Yellow-Orange pigmented fluorescent base coat.
MIL-P-21600A Clear A high visibility,durable, exterior, fluorescent paint system including a clear overlay
Fluor. Red-Orange coating containing UV and weather stabilizer which issold separate from the
Fluor. Yellow-Orange pigmented fluorescent base coat.
MIL-P-22332B Red Oxide A corrosion-inhibiting, zinc chromate primer primarily intended forcoating the
interior and exterior surfaces of ammunition and rockets.
MIL-P-23377F Yellow A two-component, low VOC, high build, strontium chromate type epoxy-polyamide
Dark Green primer for spray and brush applications. Chemical- and solvent-resistant.
-Type I,Class C: Yellow
-Type II,Class C: Dark Green
MIL-P-23377G Yellow A two-component, low VOC, high build, strontium chromate type epoxy-polyamide
Dark Green primer for spray and brush applications.
-Type I,Class C: Yellow
-Type II,Class C: Dark Green
MIL-P-24441A Green A heavy duty two component epoxy primer that does not contain lead, chromium or
other toxic metal pigments.
-Type I:
MIL-P-26915B Gray A lead-free, high-solids zinc-dust primer forsteel surfaces.
MIL-P-46105 Gray A single package, heat convertible/curing epoxy-based, zinc-rich primer for use on
ferrous metal surfaces prior to spot welding. Protects steel galvanically, thus
preventing below film corrosion.
MIL-P-47115 Fed. Std. 595B An abrasion-, chemical-, and heat-resistant epoxy paint.
MIL-P-52192B Red Oxide A two-component, air-drying or baking, chemical resistant epoxy primer. Can be
used for ferrous and non ferrous metals as well as other substrates.
5

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
MIL-P-53022A Fed. Std.595B A lead andchromate free,corrosion-inhibiting,epoxycoatingprimer.
MIL-P-53022B White A two-component, flashdry,corrosioninhibitingleadandchromate-freeepoxy
LightGray primer. Can be used forferrousandnon-ferrousmetalsas wellas other
substrates.This primerhas alow VolatileOrganicCompound(VOC) content and
can be used toreplaceMIL-P-23377F and MIL-P-52192 where exposure tolead or
chromate pigments isnotacceptable.
MIL-P-53030A White A two component, airdry,waterreducibleepoxy typeprimerforferrousand non-
Gray ferrousmetals.
MIL-P-85582C #34151 Green A two-component waterborne epoxy polyamine primer.
#34052 Green -Type I:Standard#34151 Green
-Type II:Low infraredreflective#34052Green
-Class C2:Chromate rustinhibitorformulation
-Class N:Non-chromate rustinhibitorformulation
MIL-P-85582D #34151 Green A two-component, waterborne hi-solidsepoxyprimer.
#34052 Green -Type I:Standard#34151 Green
-Type II:Low infraredreflective#34052Green
-Class C2:Chromate rustinhibitorformulation
-Class N:Non-chromate rustinhibitorformulation
MIL-PRF-680 N/A A degreasing solvent.
MIL-PRF-3043C Green A thermosettingresincoatingforsurfacesofengine components and metalparts.
(Blueinpackage) Dyed toasemi- transparentbluecolorwhichchanges togreenupon proper baking.
MIL-PRF-22750F Fed. Std.595B A high-solidsepoxycoating.
MIL-PRF-23377G Yellow A two-component, lowVOC, epoxy-polyamide primerforsprayand brush
Dark Green applications.
-Type I,ClassC: Yellow
-Type II,ClassC:Dark Green
MIL-PRF-23377H Gray A two-component, lowVOC, epoxy-polyamide primerforsprayand brush
Yellow applications.
Dark Green -Type I,ClassC: Yellow
-Type II,ClassC:Dark Green
MIL-PRF-24635C Fed. Std.595B A high gradecopolymerized siliconealkydsemiglossenamel intendedforuse on
primed smooth metal surfaces.Itishighlyweatherresistantandhas superiorcolor
and glossretention.
-Type II:340g/lmax VOC
-Type III:240g/lmax VOC
-Class 1:Gloss
-Class 2:Semigloss
-Class 3:Low gloss
MIL-PRF-26915D Gray An organictype paintwhichproduces a filmcontaininghighmetalliczincincontact
withthe steel.Likegalvanizing,thiszinciselectricallyconductive,thereby
preventingcorrosionelectro-chemically.Itisalsosuitableasafinishcoatonall
ferrousand galvanizedsurfaces.
Class A: 340g/lmax VOC
Class B: 250g/lmax VOC
MIL-PRF-81352B Fed. Std.595B An exterioracryliclacquercoatingforprotectionofmetalsurfaces.
MIL-PRF-85285C Fed. Std.595B A two-component aliphatic,polyesterpolyurethanecoating.
MIL-PRF-85285D Fed. Std.595B A two-component aliphatic,highsolids,low-VOC,polyesterpolyurethanecoating.
MIL-PRF-85582C #34151 Green A two-component waterborne epoxy polyamine primer.
#34052 Green -Type I:Standard#34151 Green
-Type II:Low infraredreflective#34052Green
-Class C2:Chromate rustinhibitorformulation
-Class N:Non-chromate rustinhibitorformulation
MIL-PRF-85582D #34151 Green A two-component waterborne epoxy polyamine primer.
#34052 Green -Type I:Standard#34151 Green
-Type II:Low infraredreflective#34052Green
-Class C2:Chromate rustinhibitorformulation
-Class N:Non-chromate rustinhibitorformulation
MIL-R-3043B Green A thermosettingresincoatingforsurfacesofengine components and metalparts.
(Blueinpackage) Dyed toasemi- transparentbluecolorwhichchanges togreenupon proper baking.
6

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
MIL-T-19544E N/A One type of specially blended solvent specially formulated for the reduction of
acrylic nitrocellulose lacquers.
MIL-T-19588A N/A A toluene/methyl ethyl ketone mixture solvent.
MIL-T-81772B N/A One type of specially blended solvent specially formulated for the reduction of two-
component polyurethane coatings.
-Type I:Polyurethane thinner
-Type II:Epoxy thinner
-Type III:Lacquer and alkyd thinner
MIL-V-173C Clear An air dry, moisture and fungus resistant clear gloss varnish. Protects and
insulates.
MIL-V-12276D Green A baking type, pigmented, semi-transparent phenolic varnish. Itis intended for use
(Blue in package) as a protective finish for lining munitions, chemical and other containers requiring
special protection.
MIL-V-13811D Fed. Std. 595B An electrical ignition waterproofing varnish.
MIL-V-21064A Fed. Std. 595B A baking-type finishing varnish.
MIL-W-5044C Fed. Std. 595B A non-slip walkway coating with non-skid properties.
-Type I:Smooth, no grit
-Type II:Grit added
MPI #9 Fed. Std. 595B An exterior alkyd gloss enamel.
MPI #28 Clear A gloss clear, air-drying, phenolic modified, alkyd spar varnish for use on exterior
wood surfaces. Itisextremely water and mildew resistant.
MPI #32 White A ready-mixed trafficpaint forapplication to trafficbearing surfaces, such as
Green Portland cement, concrete, bituminous pavement, brick surfaces of streets,
Yellow highways, bridges, tunnels, etc.
Black
Red
Blue
MPI #49 Fed. Std. 595B An interior alkyd flatpaint.
P-415A-66 Red Oxide A two component chemically cured product that forms a film that is resistant to
chemicals, solvents, moisture, immersion and abrasion. This product has excellent
adhesion to most substrates and is recommended forheavy duty industrial
applications where a tough, chemical resistant primer is required.
P-674-66 Light Gray A lead-free ,high-solids alkyd primer for wood and ferrous metal.
T-120-66 N/A One type of thinner-reducer for pre-treatment wash primers.
T-262A-66 N/A One type of specially blended solvent specially formulated for the reduction of two-
component epoxy coatings.
TPD-1000A Aluminum A high-heat aluminum coating.
TPD-24607 Fed. Std. 595B A non-flaming coating that isresistant to burning and flaming per ASTM E-162 with
a maximum flame index of less than 20.
TT-C-542E Clear A single component clear polyurethane coating formulated for excellent exterior
durability.
TT-C-2114 Fed. Std. 595B An obliterating coating.
TT-E-485F #24084 Olive Drab A semigloss rust inhibiting enamel for use on metal as a one or two coat
primer/finishing coating system.
-Type I:Dip application
-Type II:Brush and rollerapplication
-Type III:Roller coat application
-Type IV: Flash dry application
TT-E-487E Fed. Std. 595B An alkyd base floor and deck enamel for use on interior and exterior wood and
concrete floor and decks. May also be used on ferrous metal decking subject to
minimum foot traffic.Itis selfpriming on concrete and bare wood.
TT-E-489G Fed. Std. 595B A high grade, single component, air dry, high gloss alkyd enamel formulated for
interior and exterior primed metal and wood surfaces.
TT-E-489H Fed. Std. 595B A high grade, high gloss alkyd enamel formulated for interior and exterior primed
metal and wood surfaces. Low VOC, high-solids formulation.
7

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
TT-E-489J Fed. Std. 595B A high grade, high gloss alkyd enamel formulated for interior and exterior primed
metal and wood surfaces. A Low VOC, high-solids formulation.
TT-E-490E Fed. Std. 595B A high grade silicone alkyd type copolymer gloss and medium gloss enamels
intended for use on primed metal but particularly on smooth exterior metal. Itis
highly weather-resistant and has superior color and gloss retention. Its inherent
high heat resistance is due to the high silicone content of the resin. Resists
temperatures up to 600 degrees Fahrenheit.
TT-E-496B Black A heat-resisting enamel.
TT-E-506K Fed. Std. 595B An interior alkyd gloss enamel.
-Type I:Tints and whites
-Type II:Hi-hide white
TT-E-508C Fed. Std. 595B A high quality semigloss alkyd enamel for use on all wood, metal or masonry
surfaces. This product isextremely durable with excellent flow and leveling
characteristics.
TT-E-509C Fed. Std. 595B An odorless, interior grade, alkyd enamel formulated for low "VOC" content.
-Type I:Tints and whites
-Type II:Hi-hide white
TT-E-515A Fed. Std. 595B A quick-dry, lusterless, alkyd enamel formulated for low-voc content. This coating
(Lusterless only) is primarily used as a fast dry finish coat on equipment.
TT-E-516A Fed. Std. 595B A quick-dry, lusterless, styrenated alkyd enamel This coating is primarily used as a
(Lusterless only) finish coat on ammunition and other metal surfaces.
TT-E-522A Fed. Std. 595B An exterior phenolic enamel.
TT-E-527C Fed. Std. 595B An exterior grade, lusterless alkyd enamel.
TT-E-527D Fed. Std. 595B An exterior grade, lusterless alkyd enamel formulated forlow "VOC" content.
TT-E-529G Fed. Std. 595B A semi-gloss, alkyd enamel formulated for interior and exterior metal and wood
surfaces. This coating isprimarily used as a medium dry finish coat on equipment.
TT-E-545C Fed. Std. 595B An odorless, interior, alkyd undercoat enamel.
TT-E-1384 Fed. Std. 595B A durable, high gloss, acrylic enamel formulated to give excellent exterior durability.
TT-E-1593B Fed. Std. 595B An air-dry, interior/exterior silicone alkyd coating for use on primed metal surfaces.
TT-E-1793 Fed. Std. 595B A metal and wood furniture semigloss enamel.
-Class A: Air dry
-Class B: Baking
TT-E-2124B Fed. Std. 595B A vinyl alkyd enamel.
TT-F-1098D White A solvent-thinned block fillerfor porous surfaces.
TT-I-735 N/A One type of alcohol that may also be called out as Isopropanol or 2-Propanol. This
solvent is 100% miscible inwater.
TT-L-20A Fed. Std. 595B A nitrocellulose lacquer for use primarily on metal surfaces, usually specified by the
Government for camouflage surfaces.
TT-L-26C Clear A brushing lacquer.
Fed. Std. 595B
TT-L-32A Cobblestone A very high quality nitrocellulose lacquer with good exterior durability and gloss.
New "HAPS" free formulation. This lacquer originally was designed as an aircraft
finishing material, but itis now specified wherever a quality nitrocellulose finishing
lacquer is required.
-Type I:Normal use
-Type II:Use under enforcement ofair pollution regulations
TT-L-50E Clear A high grade lacquer coating supplied in pressurized dispensers for general
Fed. Std. 595B purpose applications.
-Type I:Nitrocellulose
-Type II:Acrylic
-Type III:Acrylic-cellulose acetate butyrate
TT-L-50G Clear A high grade lacquer coating supplied in pressurized dispensers for general
Fed. Std. 595B purpose applications.
-Type I:Nitrocellulose
-Type II:Acrylic
-Type III:Acrylic-cellulose acetate butyrate
8

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
TT-L-54C Fed. Std.595B An acid-resistantsprayinglacquer.
TT-L-58E Fed. Std.595B A very highqualitynitrocelluloselacquerforgeneralinterioruseasafinishingcoat
over aprimed metal ora sealedwood substrate.
TT-N-95B N/A An aliphaticnaphthasolvent.
-Type I:Fororganiccoatings
-Type II:Forcleaningacrylicplastics
TT-N-97C N/A An aromatic naphthasolvent.
TT-P-19D Fed. Std.595B A 100% acryliccoatingthatwillprovideexcellentdurabilityandweatherresistance.
TT-P-24E Fed. Std.595B A concreteand masonry oilpaint.
TT-P-26C Fed. Std.595B A fire-resistantcoatingformulatedwithaspecialtypeofalkydresinforfireretardant
coatings.This coatinggivesverygood fireretardancywhileprotectingthe
substratefrom abrasionand wear.
TT-P-28G BrightAluminum A ready mixed,high heatcoatingformulatedwithsiliconeresin.
TT-P-29J Fed. Std.595B An interiorlatexpaint.
TT-P-29K Fed. Std.595B An interiorlatexpaint.
TT-P-30E Fed. Std.595B An odorlessinterioralkydpaint.
(Flatonly)
TT-P-31D Brown An oilpaint.
Red Oxide
TT-P-32B Fed. Std.595B A blackboard coatingpaint.
TT-P-38E Aluminum An air-dry,ready-mixedaluminum coatingconformingto FederalSpecifications.
TT-P-47G Fed. Std.595B A ready-mixed flatoilpaint.
TT-P-59E InternationalOrange A ready-mixed paint.
TT-P-81E Fed. Std.595B A high quality,long-oilalkydenamelforuseonallwood surfaces.Thisproductis
extremely durablewithexcellentflowandlevelingcharacteristics.
TT-P-85E White A ready mixed,airdry,solventbase trafficpaint.
Yellow
TT-P-87D White A reflectorizedtrafficpaint,premixedwithlow-indexglassspheres,designedfor
Yellow drop-on applicationofadditionalquantityofcoarserlow-indexspheresattimeof
application;intendedfortrafficmarking.
TT-P-91D Fed. Std.595B A concreteand masonry, rubber-base,interiorfloorpaint.
-Type I:Chlorinatedrubberformulation
-Type II:Styrenebutadieneformulation
TT-P-95C Fed. Std.595B A chlorinated,rubberbasedcoatingdesigned towithstandcontinuous submersion
and the effectsofwearand weather.
TT-P-97D White A styrene-butadiene,solvent-type,exteriormasonrypaint.
TT-P-98C Fed. Std.595B A flatstencilpaint.
(Flatonly)
TT-P-102F Fed. Std.595B An exteriorgrade,longoilalkydenamel forgeneralexterioruseon new or
previouslypaintedwood trim,siding,primedmetaland sealed concrete.Itislead
and chromate freewitha low"VOC" content.
TT-P-110C Black A conventionaldrysolvent-basetrafficcoating.
TT-P-115F Red A conventionaldrysolvent-basetrafficcoating.
Black -Type I:Slow dryingformulation
Blue -Type II:Fastdryingformulation
White
Yellow
TT-P-320D Aluminum An aluminum pigmentinpowder or pasteform forpaint.
-Type I:Minimum 99%
-Type II:Minimum 65%
-Class A:Extrafinelining
-Class B:Standard lining
-Class C:Standard fineness
TT-P-620C Fed. Std.595B A coatingprimerconditionerforchalkingexteriormasonry.
9

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
TT-P-636D Red Oxide An alkyd primer coating for wood and ferrous metal.
TT-P-641G Gray A two part, high-solids, zinc-dust, zinc oxide primer that protects steel galvanically,
thus preventing below filmcorrosion.
TT-P-645A Red A corrosion-inhibiting, zinc chromate primer.
Green
Yellow
TT-P-645B Yellow A zinc molybdate alkyd primer
TT-P-650D White A latex-base interior primer coating for gypsum wallboard.
TT-P-662B Fed. Std. 595B A surfacer, sanding, lacquer, and enamel type primer.
TT-P-664C Red Oxide A synthetic, rust-inhibiting, lacquer resisting primer coating.
TT-P-1385 Gray A synthetic primer.
TT-P-1411A Fed. Std. 595B A cementitious waterproofing coating for concrete and masonry walls.
(Lusterless only)
TT-P-1511B Fed. Std. 595B A vinyl acrylic latex semigloss enamel with quick dry and good adhesion.
TT-P-1757A Green A low-moisture sensitivity, corrosion-inhibiting zinc chromate primer.
Yellow
TT-P-1757B Green A one-component, alkyd base, corrosion-inhibiting zinc chromate primer.
Yellow
TT-P-1952B White A conventional dry waterbase trafficcoating.
Yellow
Red
TT-P-1952C White A conventional dry waterbase trafficcoating.
Yellow
Red
TT-P-1952D Fed. Std. 595B A conventional dry waterbase trafficcoating.
TT-P-2756A Fed. Std. 595B A low VOC, self priming, polyurethane coating.
TT-P-2846 Fed. Std. 595B A recycled latex paint.
-Type I:Interior
-Type II:Exterior
-Type III:Interior/Exterior
TT-S-171C Clear A lacquer-type floor sealer.
TT-S-176E Clear A varnish-type surface sealer for wood and cork floors.
TT-S-179B White An oilbase pigmented wallboard and plaster surface sealer.
Off White
TT-S-223B Clear A specially formulated clear acrylic based sealer designed to be used as a sealer
and dust reducer on floors. May be used on concrete, asphalt tile,linoleum and
masonry floors.
TT-S-300A N/A Shellac.
TT-S-711C Fed. Std. 595B An interior lead free, semi-transparent stain that protects and enhances the natural
texture of fine wood.
TT-S-1992 Fed. Std. 595B A latex exterior wood stain.
TT-T-266D N/A A thinner for cellulose-nitrate based dopes and lacquers of the spraying type.
Suitable for use under airpollution regulations.
TT-T-291F N/A Three types of Mineral Spirits (volatile petroleum spirits)for thinning paints,
enamels, varnishes and paint related materials.
TT-T-306C N/A Two types of synthetic resin enamel thinners, for general use and limited use.
-Type I:General use
-Type II:Use under air pollution restrictions
TT-T-306E N/A A type of synthetic resin enamel thinner.
-Type I:General use
-Type II:Use under air pollution restrictions
TT-T-548F N/A Toluene.
TT-T-1384 Fed. Std. 595B A synthetic, gloss, acrylic enamel formulated to give excellent exterior durability.
10

Government Paint Specifications INDEX
SPECIFICATION COLORS DESCRIPTION
TT-T-2935 N/A A purging thinner.
TT-V-51F Clear An asphalt varnish.
TT-V-81G Clear A mixing varnish for aluminum paint.
-Type I:For use as wood primer
-Type II:For general use
TT-V-109C Clear A clear, air-drying alkyd varnish forinterior use.
TT-V-119D Clear A clear, air-drying phenolic spar varnish for use on exterior wood surfaces. It is
extremely water and mildew resistant.
TT-V-121H Clear A water-resisting spar varnish.
TT-W-572 Clear A water repellent, penetrating sealer that willprovide protection to any wood or
Fed. Std. 595B concrete surface or structure.
TT-X-916B N/A One type of solvent that or thinner primarily foruse inprotective coatings.
11

EPOXY INDUCTIVE LOOP SEALANT
These sealants are formulated to meet all different type individual state
specifications. In conjunction with the aforementioned products, the line also
includes a comprehensive variation of general and specific sealant products.
Many of these will meet individual state, municipal and county government
specifications.
EPOXY ADHESIVE
We have produced custom manufactured material to satisfy governmental
agencies needs for pavement markers, plastics, metal and concrete. Physical
properties such as viscosity, hardness, flexibility,drying time, and weight per
gallon can be varied tosuit.
12

EPOXY AIR DRY
This series of aircraftand commercial finishes was developed to provide a
maximum of resistance to such materials as skydrol hydraulic fluid, diester
lubricants,high octane availation and polyglycol jetfuels. Epoxy type enamels
contain an optimum balance of hardness, adhesion and toughness unmatched
by any other resin. Exceptional results can be obtained ifapplication instructions
are followed implicitly. Polishing may be required ifsome chalking is exhibited.
Inthis series are those coatings meeting specification MIL-C-22750D.
"
Application: Spray
" Thinner: MIL-T-81772B Type II
"
Approximate Coverage: 350sq. ft.
" Color: Color matched as desired
" Drying time: 4hours to overnight
A more recent development of the above is our hydropox series which is a water
based equivalent of the above. This then contains the considerable inherent
advantages of water based coatings. The main highlights of this paint is that it
has excellent water cleanup for tools and equipment; excellent solvent
resistance; and excellent adhesion to allthe substrates not usually found inother
water base type coatings.
13

FIRE RETARDANT PAINTS
Continuing the overallunusual characteristics of TriCom Coatings, Inc.
development, the laboratories have enhanced the commonly accepted surface
spread protection from normal conflagrations. In this progression, the importance
ofheat transferco-efficients have been emphasized. In addition,itis wellknown
thatmost fatalitiesfrom fireare not caused by the flame itself.Thus, allfire
retardant materials supplied by TriCom Coatings, Inc. contain special smoke
suppressingingredients.
POLYPANE INDUSTRIAL POLYURETHANE ENAMEL
A unique furtherance of molecular organic coatings chemistry is the development
ofpolyurethane enamel. This is a chemical combination of polyurethane and
polyester reaction which provides outstanding and unsurpassed physical
properties. This coating has resistance to U. V. and chemicals. Itisflexible,
hard and durable.

Category:concrete coating